17-4 H1025 Properties
17-4 H1025 Properties. Strength and toughness desired can be manipulated by temperate range in the heat treatment process. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance.
Results are displayed up to a maximum of 200 materials per page. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Hardness in hb as specified in technical sources is around 363.
While 38 Hrc Is Hard, It Can Be Machined With Carbide Tools Just Fine.
Elongation is 8% in 2 inch. Results are displayed up to a maximum of 200 materials per page. It’s suitable for intricate parts requiring corrosion.
It Has Many Favorable Properties, Including Excellent Strength, Good Corrosion Resistance, And Excellent Mechanical Properties Up To 600 °F (316 °C).
Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Strength and toughness desired can be manipulated by temperate range in the heat treatment process. Tensile strength starts from 1276 mpa in some technical sources.
It Is One Of The Most Widely Used Precipitation Hardening Grades, As It Has High Strength Hardness Up To About 572°F While Demonstrating Good Corrosion Resistance In All Heat Treated Conditions.
Generally the best condition to weld is to solution anneal, weld and do prior age hardening at 550 deg cent for 4 hrs to. It is resistant to industries where the steel may be exposed to petroleum and most foods. Hardness in hb as specified in technical sources is around 363.
28.5 X 10 6 Psi / 197 Gpa;
Yield strength starts from 1170 mpa in some technical sources. Mechanical properties may be altered by subsequent age hardening treatments. Its strength and moderate corrosion resistant properties are maintained in service temperatures up to the 600° f to 800°.
Upon Mechanical Properties For The Size In Question.
Distributors will offer small quantity buys while mills will generally only sell large quantities, with delivery times anywhere from 10 to 50 weeks depending on size and form required. You may have to do preliminary testing to assess if any crack is present and to also check the toughness in hardened condition. Mechanical properties are as under.
Post a Comment for "17-4 H1025 Properties"